UNIVERSAL offer an extensive range of viscosifiers designed to increase the viscosity of water-, oil-, and synthetic-base drilling fluids. We provide a variety of clay, polymer, and biopolymer viscosifiers to improve the hole-cleaning and solids-suspension capabilities of drilling fluids. We are the best viscosifiers manufacturer in India.
Premium-grade sodium montmorillonite clay, used as primary filter-cake building, filtration-control and suspension agent in water-base mud systems.
chemically untreated, premium-grade sodium montmorillonite clay, used as primary filter-cake building, filtration-control and suspension agent in water-base mud systems.
Rapid mixing high viscosity polymer for use in freshwater and seawater spud muds.
High molecular weight linear polysaccharide, used to increase viscosity for cutting transport and weight-material suspension for all water-base mud. Provides better rheological profile with elevated low-shear-rate viscosity and highly shear-thinning characteristics.
Highly dispersible, high molecular weight linear polysaccharide, used to increase viscosity for cutting transport and weight-material suspension for all water-base mud. Provides better rheological profile with elevated low-shear-rate viscosity and highly shear-thinning characteristics.
High purity Xanthan Gum biopolymer, suspended in an ultra-clean mineral oil or Glycol used in most types of water-based fluids for rheology modification, improved hole cleaning and solids suspension.
Premium Attapulgite clay, used to provide viscosity and hole cleaning capabilities in drilling fluids with high concentrations of salts.
Multi-purpose viscosifying agent for use in freshwater, sea-water and complex brine systems, its viscosifying characteristics are unaffected by common contaminants & dissolved salts.
HEC Polymer is designed to viscosify single-salt CaCl2 brines and all monovalent-salt brines such as NaCl, NaBr, KCl, KBr and NH4Cl. It can also be used to provide viscosity for pills or spacers, fluid-loss control, hole cleaning while washing, milling or reaming, gravel-pack fluids, and non-damaging drill-in fluids. The amount of HEC Polymer required to obtain a specific brine viscosity is dependent upon the composition and density of the brine.
Some of other Universal viscosifiers manufacturer.
UNIDRILL EA (HS)
UNIDRILL EA (HS) is used in very small quantity to increase the viscosity of Bentonite suspension of very low concentration of bentonite in the system. It is essentially used as a Viscosifier for the Drilling Mud Systems
UNIMUL-100 used in synthetic-base mud systems, this viscosifier increases low-shear-rate viscosities and gel strengths for improved hole cleaning. UNIMUL 100 is a primary emulsifier used for formulating invert drilling fluids. It will provide high emulsification and some fluid loss control. UNIMUL-100 is commonly used with secondary mud emulsifiers such as UNIMUL P or S.
This viscosifier for the organophilic, thermally stable, flat-rheology invert-emulsion drilling fluid provides solids suspension during transportation to the rig site.
MMO when added with water, MMO viscosifier particles bond to the cation exchange side on bentonite, thereby by forming a strong complex that gives the fluids structure and provides viscosity and gel. Temperature stable up to 3000F
Bentonite Extender with the capability of doubling bentonite yield, this bentonite extender is able to maintain a given viscosity with half the amount of conventional clay solids while causing drilled solids to agglomerate and settle out.
UNITONE-PR is used to impart viscosity and suspension properties to oil-based drilling fluids. UNITONE-PR is also used to gel oil drilling fluids for long-term suspension of weighting agents in drilling and packer fluids. UNITONE-PR typically yields faster than UNITONE-PR but will reach the same final viscosity. UNITONE-PR is usually preferred in mineral oil based fluids. UNITONE-PR is stable to 350°F (176°C). UNITONE-PR should not be used in high performance clay-free oil based drilling fluids
We are another viscosifiers manufacturer named as “UNITONE-SD” is high-temperature filtration control agent, act synergistically with emulsifiers in conventional invert emulsion systems to enhance the overall emulsion and thermal stability. UNITONE-SD typically yields faster than UNITONE-SD but will reach the same final viscosity. UNITONE-SD is usually preferred in mineral oil based fluids. UNITONE-SD is stable at 350°F (176°C). UNITONE-SD should not be used in high performance clay-free oil-based drilling fluids.
UNIMUL-NT viscosifier is used in oil-base, synthetic-base, and paraffin-base drilling fluid systems with high‐temperature requirements
High Temperature stable invert emulsions, secondary wetting, reduce HPHT filtration, improves thermal stability and resistance to contamination in oil mud systems
UNIMUL-HT excellent emulsion stability, secondary wetting, HTHP filtration control, high temperature stability and contamination resistance of oil mud systems. UNIMUL-NT viscosifier is used in oil-base, synthetic-base, and paraffin-base drilling fluid systems with high‐temperature requirements
UNIVIS-OBM elevated yield point and gel strength with minimal increase in plastic viscosity thereby minimize the amount of clay in the formulation and improves LSRV to increase shear thinning, thixotropic characteristics oil base mud.
Reduces viscosity and gel strength in oil base mud caused by high content of colloidal solids, without the need for charging the oil/water ratio.
universal is manufacture of a variety of clay, polymer, and biopolymer viscosifiers to improve the hole-cleaning. Contact for viscosifiers manufacturer in india.